User Manual N11
Safety instructions for initial operation
Industrial PC
3085-US-2.4
www.noax.com
Page 27 of 120
7.1
Touchscreen
Warning
To avoid damage and malfunctions, do not touch or clean the touchscreen surface with
pointed, sharp, hard, or rough objects.
For extreme conditions protective screen films for the touchscreen are available
as an optional accessory.
Warning
Do not hit or apply strong force to the touchscreen or the display, as this could cause
damage or destruction (e.g., resulting in glass breakage).
Caution
Avoid placing the Industrial PC with the touchscreen facing down. If this is absolutely
necessary, put a soft cloth or piece of foam underneath it and make sure that the
touchscreen cannot be damaged by any objects (e.g., screws).
Caution
Do not wipe the touchscreen with items of clothing or sponges because this could
scratch the surface (e.g., buttons on jacket sleeves or grit in sponges).
You can find further information about cleaning the touchscreen in Chapter 13.2.
Warning for device type C12P, C15P, S15P, S19P and S21WP
The front of these device types - the projected capacitive touchscreen - consists of
hardened glass. If not used properly, the glass surface may be chipped or broken.
7.2
Measures for compliance with EMC guidelines
Always use shielded connecting cables when connecting devices to the serial interfaces
(e.g., COM1 or COM2) of the noax Industrial PC to ensure trouble‐free operation of the
connected devices and the Industrial PC.
noax Industrial PCs may be equipped only with antennas (WLAN, etc.) which are sold
by noax.
