Adjustable mounting solutions
S15P / S19P / S21Wx / C‐Series
Product Information
www.noax.com
Page 4 of 14
3095-US-1.2
2
Table Stand adjustable
The Table Stand adjustable is intended to be used on a plain, horizontal mounting
surface.
Below the scope of delivery and specifications of the Table Stand adjustable are ex
plained. Notes for installing the Industrial PC onto the mounting solutions are explained
in chapter 5, notes for handling the mounting solutions can be found in chapter 6.
2.1
Scope of delivery and specifications
Fig. 1:
Scope of delivery for adjustable table stand (S15P/S19P/S21Wx/C‐Series)
noax part no.:
14950
Description:
Table Stand adjustable (
S15P/S19P/S21Wx/C‐Series
)
Dimensions (LxWxH):
9.85 x 8.66 x 12.38 inch (250 x 220 x 314.5 mm)
(without rubber feet)
Weight:
10.6 lbs (4.8 kg)
Pivot height:
10.91 inch (277 mm) - (without rubber feet)
Setting angle / Catch:
60° setting angle upwards
Catch in 10° intervals
Scope of delivery:
1x Table Stand adjustable (
S15P/S19P/S21Wx/C‐Series
),
pre‐assembled
Mounting bolts (Industrial PC on table stand):
4x M6x10mm hexagon socket screw
Mounting material for rubber feet on table stand:
4x rubber feet
4x M5x18mm hexagon socket screw
8x M5 washer
4x M5 cap nut
If the Industrial PC is tilted more than 45° or the Table Stand stands not secure,
the Table Stand have to be fastened to the mounting surface! noax recommends
the fastening to the mounting surface.
To do this, use all 4 holes in the bottom of the
table stand. In this case, the rubber feet are not installed.
Use suitable fastening
material for the table stand (e.g. suitable for underground and weight / force)!