Power Button
Button Operation
In the standby state, press the power button to turn on, the operation
indicator lights up and the default fan speed is high, at the same time
the negative ion/UV light turning on, and the default humidity is 60%
when the dehumidifier begins running. In the power-on state, press
the power button to turn off, the running indicator light goes off and the
compressor stops immediately, and then the fan shut down after 10
seconds delay.
Humidity Button
Touch the humidity button to check the current environment humidity,
touch this button again and you can set the humidity. Every time press
this button and a beep will sound, then the screen flashes and the
target humidity value increase 5% once. The range of target humidity
is 20% - 25%- 30%- 35% - 40% - 45% - 50% - 55%- 60% - 65% -70%
- 75%- 80%. After setting 3 seconds, the system confirms the input
value and then the machine exits the setting state, and returns the
current humidity value. In the drying mode, the target humidity cannot
be changed. Long Press humidity button for 5 seconds to display the
current ambient temperature.
