INSTALLATION INSTRUCTIONS:
3
STEP4
STEP1
Remove Both
Screws
STEP3
Screws
Mounting
Bracket
Rubber pad
Mounting
Bar
STEP2
Remove backing
From Rubber Pad
& Push Down
YOU'LL NEED: A SCREW DRIVER
YOU'LL NEED: THE RUBBER PAD TO
ADJUST THE SIZE OF THE MOUNTING
BRACKET
FINISHED INSTALLATION !!
BEGIN ENJOYING YOUR MUSIC !!
YOU'LL NEED: 2 SCREWS, MOUNTING
BRACKET, RUBBER PAD AND THE
MOUNTING BAR
Remove the two screws from the bracket
to separate the Speaker case and the
bracket.
Mount the speaker on the bar where
you want. The mounting dimension is
available from 1.25"~ 2”.
Remove the backing from the Rubber
Pad and stick on the mounting surface
Pad No.1: 76X30X2mm* 6PCS
Pad No.2: 140x30x3mm*4PCS
Pad No.3: 38x30x3mm*4PCS
2” Bar: Pad No.1* 2PCS
1.75” Bar: Pad No.1*2PCS and Pad No. 2*1PC
1.5” Bar: Pad No.1*2PCS and Pad No. 2*2PCS
1.25” Bar: Pad No.1*2PCS and Pad No. 2*3 PCS
NOTE
Rubber Pad in 3 Specification:
Rubber Pad Quantity You Need for Each Mounting Dimension:
Attention: Please Cut Pad No.2 into the Size You Need for Each Mounting Bar Size
Note: pad No.3 is an extra small pad that can be used in case you need an extra spacer for a better grip
