Noah Systems PL Series, Product Manual, Page: 5 / 12

5
To activate:
•
Insert the Safety Interlock
• Press the Power/Mode Switch located at the base of the laser
• Press the Power/Mode Switch according to desired mode
MODE PL-2-445 PL-5-445 PL-9-445 PL-3-525
1 1 Watt (Blue) 1 Watt (Blue) 1 Watt (Blue)
1 Watt
(Green)
2 2 Watt 2 Watt 3 Watt 2 Watt
3 N/A 3 Watt 5 Watt 3 Watt
4 N/A 5 Watt 9 Watt N/A
MODE PL-410-445 PL-445-520
BLUE UV BLUE GREEN
1 3 Watt 1 Watt 3 Watt 1 Watt
2 6 Watt 2 Watt 6 Watt 2 Watt
3 9 Watt 3 Watt 9 Watt 3 Watt
NOTE: After the Power Switch is powered off, it will not retain the mode in memory and will start again at
Mode 1 when powered back on; this insures additional safety from accidental over exposure, as well as
lower power to be used at short distances.
NOTE: Lasers are equipped with thermal protection that may shut off during prolonged use. The unit will
be able to turn back on when allowed to cool down.
OPERATIONAL MODES