noahome.com
ASSEMBLY
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
Press the casters into the holes at the
end of each leg of the base.
Insert the bottom end of the gas lift
into the center hole of the base.
Attach armrests to the seat cushion.
Insert 6 armrest screws, washers and
thick washers (A, E & G) into the
pre-drilled holes as shown in the
diagram above.
Tighten securely with the Allen key
(H).
Place the seat cushion face down on a
flat surface.
Attach mechanism to the seat cushion
by inserting a total of 4 mechanism
screws (2 x B / 2 x C) and 2 thick
washers (G).
Tighten securely with the Allen key
(H).
Attach the backrest to the seat
cushion.
Insert 3 back attachment screws and
washers (D & F) into the 3 pre-drilled
holes.
Turn the assembled seat upright and
locate the center hole of the
mechanism over the seat post.
Push down firmly until the connection
to the gas lift is secure.
A * 6 pcs
E * 6 pcs
G * 4 pcs
B * 2 pcs
C * 2 pcs
G * 2 pcs
Backrest side
Backrest side
D * 3 pcs
F * 3 pcs
