12
13
Operating
Your no!no!
®
Precision Trimmer is perfectly suited for closely and safely removing any
unwanted hair on body and face e.g. neck, back, eyebrows.
The product comes with two trimming combs long
2
and short
3
for trimming hair to a
uniform length.
Ensure the appliance is turned OFF
6
before attaching a trimming comb. We recommend
that you start with the long trimming comb
2
.
Make sure that the teeth of the comb are facing in the same direction as the trimming blades.
Slide the comb over the trimmer head until it clicks into place.
Slide the ON/OFF switch up
6
to the ‘1’ position to turn the appliance on.
Ensure that the comb is laid flat against the skin.
Place the trimmer gently against the hair to be removed and glide it slowly against the
direction of hair growth.
For optimum results, pull the skin taut with one hand while using.
When trimming is complete, remove the comb and place the protective cap
8
over the
trimmer head to protect the blades when not in use.
The no!no!
®
Precision Trimmer can also be used without the long
2
or short
3
trimming
How to no!no!
comb to edge and shape areas as desired.
A smaller (6mm) trimmer head
1
is supplied for precision trimming and smaller areas.
Pull your skin taut with one hand and glide the trimmer against the direction of hair growth.
Put the protective cap
8
on to keep blades new and place the trimmer in the storage
stand
4
to keep it tidy.
Changing the Trimmer Heads
To use the smaller trimmer head, remove
the larger (18mm) trimmer head
5
from the
unit by turning it 45° in an anti-clockwise
direction. Gently lift-off the larger (18mm)
trimmer head
5
from the unit and insert the
smaller trimmer head
1
into the unit. Lock it
into place by following the reverse method of
removing the trimmer head.
A
B
C
D
