background image

Indicating lights: 

Blue, Red & Purple

Battery type: 

Built in 18650 battery - more than 20A discharge.

Charging instructions: 

Charge inside LiPo Charging Bag and use a 

No-Match Mains-USB 5V 1A charger (not supplied) or a suitable computer USB 
port.

Size: 

32 * 23 * 130 mm

Charging Time:

 Up to 4 hours (DO NOT CHARGE FOR MORE THAN 4 HOURS)

Tank/Atomiser

Resistance: 

0.6Ω, 1.0Ω ( spare included coil ) (0.3Ω available separately)

Capacity: 

<2.0ml

Construction: 

100% USA made Kanthal wire, 304 stainless steel + 

Borosilicate glass, 100% Organic Cotton.

Battery

Output power: 

50W Max

Supported coil resistance range: 

0.3Ω ~ 3.0Ω (Please note some 

atomisers may require more power even if they fall within this range.
Please check your manufacturers instructions)

08

output.

Low voltage:  

If the voltage gets lower than 3.3v the red light will flash 15 

times and will automatcially cut off the power output.

Over-charging protection:  

When the battery voltage reaches 4.25v the 

device will stop charging.

Charging indication:  

Connect the ATOM battery to a No-Match 5V 1A 

charger or a suitable computer USB port and the power status will show:
Red light - The voltage is less than 3.5v
Purple light - The voltage is between 3.5v & 3.8v
Blue light - Voltage is over 3.8v
All lights off - Fully charged (or not connected to charger)

Operation (d)

07

Operating Instructions

On/Off:  

Press the vaping button 5 times within 2 seconds to turn on/off 

device. The indication light will flash 3 times.  The light will illuminate blue 

(voltage ≥3.8v), Purple (Voltage 3.5v - 3.8v) or red (Voltage <3.5v)

Vaping: 

Press the vaping button and vape. Whilst vaping, the indication light 

will illuminate. The light will illuminate blue (voltage ≥3.8v), Purple (Voltage 

3.5v - 3.8v) or red (Voltage <3.5v)  Release the button and the indicator lights 

will turn off.

Short circuit protection: 

If a short circuit occurs, when you press the 

vaping button the blue/purple/red lights will alternately flash 3 times in 

sequence. 

Vaping time protection: 

If the vaping button is pressed for longer than 10 

seconds the red light will flash 8 times and will automatically cut off the power 

Operation (c)

Summary of Contents for Atom










Reviews:

Related manuals for Atom