B7 series lighting board
assembly guide
Version
0.0.3
Page 4 of 14
1.
Required tools
-tweezer
-screwdriver
-cutting plier
-cutter
-soldering station
-1-1.2 mm drill bit with holder
-small file
2.
Required materials
-B7 lighting kit
-adhesive tape
-soldering wire
3.
Disassembly of the coaches
Pull the housing in side direction at the indicated points and lift it
above the base. Remove the housing from the body of the unit.
Inserting your thumb nails in the boogie area between the
housing and the base might help.
