7
LCD Module Set Up
LCD will display the CPU & Case Temp. reading / CPU Cooler Fan Speed reading
Alarm Features
CPU Alarm Temperature
When CPU temperature hits 65ºC or 149F, the temperature reading will flash constantly until the
temperature drops below the alarm degree.
CPU Fan Alarm
When the fan stops running for whatever reason during working mode, the CPU fan speed
reading will flash constantly in “0000” until the fan is re-spinning again.
LCD Set Up
1.
Press the “
SET
” button once to set the CPU alarm degree. The CPU temp reading will
flash; use the “
C/F UP
” button to adjust the alarm degree.
2.
Press the “
SET
” button twice to set the Case alarm degree. The Case temp reading will
flash; use the “
C/F UP
” button to adjust the alarm degree.
3.
Press the “
RESET
” to reset the LCD module and turn all alarm default degree to 65ºC or
149F.
4.
Press the “
C/F UP
” button to switch the degree reading between ºC and F.
5.
Use the Fan Speed Controller to manually adjust the fan speed, adjustment range is
from 70% -100% of the fan’s full speed.
“RESET” button is for LCD Module only
(Fan Speed defaults to minimum of 70% of full speed to prevent CPU damage)
Other Component Installation
For other components, including hard drive; RAM; CPU & cooler; optical drive and operating system
etc., plan the installation steps carefully, and follow the user manual and motherboard manual
instruction to avoid damages.