NKT Photonics Koheras BOOSTIK, Product Manual

Page: 38 / 68

Status panel
38
Extensions
overview
The Extensions Overview tool is used to view the installed extensions (plugins)
that are included with CONTROL. The extensions are found in the following
folder:
C:\Program Files (x86)\NKT Photonics\NKTP CONTROL\Plugins
To view the extensions, open the Tools menu and click on Extensions Overview .
The Extensions Overview window will be launched as shown in Figure 23 .
Figure 23 Extensions Overview
Note: To show a short description of the release notes as seen in Figure 23 , hover
the mouse pointer over the “Release notes” text
Note: Multiple extensions for a wide range of NKTP lasers types and accessories
are typically installed when using the default installation of CONTROL.
5 If you select Collect Fast or
Slow log , the log is collected
and saved in dedicated mode.
The CONTROL panel turns
gray and all other functions are
disabled.
When the log is finished being
collected, all other CONTROL
functions will be enabled.
6 Select Restart Fast or Slow log
to clear all the collected log
data and restart the log data
collection.
Action
Dedicated collection mode