NKT Photonics Koheras ADJUSTIK HP, Product Manual

Page: 32 / 115

Laser Control
32
Laser Control
User interface
The laser and any associated accessories are controlled using either from a PC using
NKT Photonics CONTROL management software or the front panel interface.
As an option, the laser can also be controlled using NKTP’s Software Development
Kit (SDK) for custom applications. For further information regarding the SDK refer to
the software and drivers link at NKTP’s support webpage:
https://www.nktphotonics.com/lasers-fibers/support/technical-support-and-customer-
service/
The PC or a custom microprocessor system can connect to the laser using either the
USB serial port on the front panel or the 10/100 BASE-T Ethernet port on the rear
panel.
Section 2
includes chapters describing the front panel interface, NKTP’s CONTROL
software, and how to control and turn on the laser.