7 33-60-059-002 Box WI-FI user manual
4. WI-FI CONNECTION
The
WiFi
transmits the AIS data and the NMEA sentences coming from the NMEA
input as well as the NMEA data from the Topline bus. It can also forward NMEA data
(i.e. bearing and distance to waypoint) to the Topline bus (providing the relevant
channels are available) and to the NMEA output.
The
nke Box Wi-Fi
creates a wireless access point 802.11b+g with the following
parameters:
SSID : NKE-xxxxxx
WPA : 21xxxxxxxxxxx (matching the serial number featured on the
WiFi Box
label sticked on the side of the box)
IP address: 192.168.56.1
Port : 50000
TCP + UDP protocol
TCP is a communication protocol which is based on connection with delivery
validation and limits the use to one only host while UDP uses a simple transmission
model allowing communication with several hosts simultaneously.
A DHCP server can connect up to 7 hosts simultaneously.
Data transmitted in NMEA 0183 format is identical to the data output via the wire
interface (see §3).
5. STATUS INDICATORS
5 status indicators show the operation status of the
Box Wi-Fi
.
Status indicators
