11 33-60-059-002 Box WI-FI user manual
saved in the
nke Box Wi-Fi
memory. They will remain on the
Topline
bus each time
the system is turned on.
Setup procedure
Ensure that the NMEA 183 connected instrument sends data and press
INIT
until you hear 3 beeps.
The NMEA 183 input port will scan for NMEA 183 data. This is acknowledged
by audible signals over 10 seconds and a long signal once the scan is
completed.
Once the scan search is completed the unit will sound one signal per channel
which has been created on the Topline bus.
WARNING
If there is no NMEA data coming in, this procedure gives a slave address
to the
nke Box Wi-Fi
. In this case, the Interface is considered as a slave unit by the
“master” display.
8. SET A WIFI CONNECTION TO A SMARTPHONE
Connect the device to the
WiFi Box
network and use the data coming from your
Topline bus.
Activate the WiFi function on your Smartphone:
