Nke Watteco LWC Server User Manual Download Page 2

LWC Server User Guide

 

 
 

All Rights Reserved – nke Watteco®  

 

 

 

               

LWC  Server  User  Guide

 

 

 

 

 

            Page 2 of 25 

 

NOTICE 

 

Nke Watteco reserves the right to make changes to specifications and product descriptions or to discontinue 
any product or service without notice. Except as provided in Nke Watteco's Standard Terms and Conditions of 
Sale for products, Nke Watteco makes no warranty, representation or guarantee regarding the suitability of its 
products for any particular application nor does Nke Watteco assume any liability arising out of the application 
or  use  of  any  product  and  specifically  disclaims  any  and  all  liability,  including  consequential  or  incidental 
damages. 

Certain  applications  using  semiconductor  products  may  involve  potential  risks  of  death,  personal  injury  or 
severe property or environmental damage. Nke Watteco products are not designed, authorized or warranted 
to be suitable for use in life saving or life support devices or systems. Inclusion of Nke Watteco products in such 
applications is understood to be fully at the Customer's risk. 

In  order  to  minimize  risks  associated  with  the  customer's  application,  adequate  design  and  operating 
safeguards must be provided by the customer to minimize inherent or procedural hazards. 

Nke  Watteco  assumes  no  liability  for  applications  assistance  or  customer  product  design.  Nke  Watteco  does 
not  warrant  or  represent  that  any  license,  either  express  or  implied,  is  granted  under  any  patent  right, 
copyright,  mask  work  right,  or  other  intellectual  property  right  of  Nke  Watteco  covering  or  relating  to  any 
combination, machine or process in which such semiconductor products or services might be or are used. Nke 
Watteco's publication of information regarding any third party's products or services does not constitute  Nke 
Watteco's approval, warranty and endorsement thereof. 

Resale  of  Nke  Watteco's  products  with  statements  of  functionality  different  from  or  beyond  the  parameters 
stated by Nke Watteco for that product as defined by Nke Watteco's unique part number, voids all express and 
any implied warranties for that product, is considered by Nke Watteco to be an unfair and deceptive business 
practice and Nke Watteco is not responsible nor liable for any such use. 

Embedded  software  is  based  on  Nke  Watteco  proprietary  drivers  and  applicative  code  and  operates  on  the 
Contiki kernel from the SICS (Swedish Institute of Computer Science). 

 

 

www.watteco.com

 

www.nke-electronics.com

 

© nke Watteco.  All Rights Reserved 

 

Summary of Contents for LWC Server


























Reviews: