4
5
6
7
Setup the connection
3
Remove the battery cover and take out the nano receiver.
Insert the batteries into the mouse and close the battery
compartment.
Plug the Nano receiver into the USB port of your computer.
If the mouse is not working please put it into the pairing mode.
Pairing
: plug the nano receiver into the USB port of your computer
then press the connect button of the mouse. If the mouse does not
work after 10 seconds then pair them again. The receiver has auto
pairing function.
The LED indicator flashes steadily when it is in pairing mode and it
stops blinking when it is successfully paired with the receiver.
When the batteries’ power of the mouse is low the Low Power
indicator will start to blink.
1
2
3
03
Warning!
Please insert the batteries in the correct position acording to the
instructions labeled on the mouse.