background image

etc. until

200—209

ID20

210

ID21

211

ID22

212

ID23

etc. until 

253

ID64

254

ID65

255

ID66

To set the DMX START ADDRESS press SETUP repeatedly until

d

appears in the first character of the display. Then use the UP and

DOWN buttons to select the address required. The

DMX START

ADDRESS

 is the DMX address of the first DMX control channel.

The 2nd DMX channel is at the DMX start a 1, the 3rd

DMX channel is at the DMX start a2, etc.

CLEANING

Clean the outside of the luminaire with a soft damp cloth, with a

drop of washing-up liquid.

Clean the lenses with glass cleaner.

PAT TESTING

When used in a workplace, this product must be safety-tested yearly

by a qualified electrician (PAT Tested) in order to comply with the

Electricity at Work Regulations. 

If hired out, it must be PAT tested prior to each hire.

We recommend that it is PAT tested regularly when used in a

domestic environment.

DISPOSAL AND RECYCLING

You must not dispose of this appliance with domestic household

waste. 

Most local authorities have specific collection system for appliances

and disposal is free of charge to the end-user.

When replacing an existing appliance with a similar new appliance

your retailer may take the old appliance for disposal.

 Page 7

Summary of Contents for NJ179









Reviews: