5. CONNECT GAS TO NJ-05 BBQ
Notice:
5. l.A low gas pressure regulator is request for operation, use the
regulator recommended by manufacturer or seller
5. 2. Before you assemble the regulator, please check the gas type and
pressure shown on the gas cylinder, and make sure the information on
the regulator and cylinder match
5. 3. The hose connecting the appliance and gas cylinder is required, and
the max. length should not exceed 1.5m
5. 4 . The connecting hose could not be twisted .
5. 5. Change the connecting hose when the national conditions require.
5. 6. This appliance must kept away from flammable materials during use.
5. 7 Do not put the cartridge under the N
J-
05 BB
Q
keep it more than
40cm away
Connect:
5. 1 Be sure that the burner valves are in the "OFF"position before you
connect the N
J-
05 BB
Q
to a gas or propane supply line.
5. 2. Connect the inlet of the stove with the outlet of the gas regulator. This
connection must be made with a specialized hose for LP gas.
5. 3. Be sure that the hose is placed correctly and is not being stretched, tied,
or bent.
4. Also be sure that the hose is not too close to heat sources, especially to
the body of N
J-
05 BB
Q
.
5. It is recommended that a manual gas valve is placed between the gas
pressure regulator and the inlet of the N
J-
05 BB
Q
to open or shut off
the gas supply. This valve must be in an easily accessible location.
6. LEAKAGE TESTING
6. 1. Turn all control knob(s) to OFF
6. 2. Be sure regulator is tightly connected to gas tank.
6. 3.Completely open tank valve by turning manual valve. If you hear a rushing sound,
turn gas off immediately. There is a major leak at the connection. Correct before
proceeding.
6. 4. Brush soapy solution onto indicated connections shown below.
6. 5. If growing bubbles appear, there is a leak. Turn off the gas supply in event of
gas leak. If leaks cannot be stopped, do not try to repair. Replace a new one.
5
