连接接口
Specification
连接接口
Item
Description
Power
Power Supply
Power Adapter
Voltage Range
DC5V
Consumption
＜5W
Ethernet Port
Ethernet Port
LAN Port:10/100Mbps
Transmission Distance
LAN Port: 0～100m
Optical Port
Optical Port
Double Fiber SC Port
Wavelength
1310nm
Bandwidth
155Mbps
Transmission Distance
Single Mode: 20km; Multi-mode: 2km
Network Switch
Network Standard
IEEE802.3 10BASE-T, IEEE802.3u 100BASE-TX/FX
Status
Indicator
Power LED
1 (Green)
Network LED
1 (Green) on the RJ45 socket
Optical LED
FED, SD, LINK 3 (Green)
Protection
ESD
Contact Discharge 6KV; Air Discharge 8KV
Environmental
Working Temperature
0 ~55℃
℃
Storage Temperature
-40 ~85℃
℃
Humidity (Non-condensing)
0~95%
Mechanical
Size (L×W×H)
83mm×90mm×25mm
Material
Aluminum Alloy
Color
Black
Weight
100g
Stability
MTBF
>30000h
连接接口
Trouble
Shooting
Product are subject to change without prior notice
3
4
Fast Ethernet Converter
Fast Ethernet Converter
Please find the following solution when the device doesn't work
Please confirm if the installation is correct;
Please confirm if the RJ45 cable order in accordance with the EIA/TIA568A or 568B industry
standards;
The maximum transmission distance depend on the signal source and cable's quality, please don't
exceed device's maximum transmission distance;
Please replace a normal device with a failure one to check if the device is broken;
If the problem still exist, please contact the factory.
RJ 45 Making Method
Instruments to be used: wire crimper, network tester. Wire sequence of RJ45 plug should conform with
EIA/TIA568A or 568B.
1) Shuck off about 2cm long the insulating layer, and bar the 4 pairs UTP cable;
2) Depart the 4 pairs UTP cable and straighten them;
3) Line up the 8 pieces of cables per EIA/TIA 568A or 568B;
4) Cut out 1.5 cm cable wrap and leave the bare wire;
) Plug 8 cables into RJ45 plug, make sure each cable is in each pin;
5
6) Then use wire crimper to crimp it;
7) Follow the 5 steps above to make the another end, following the same sequence of the first plug;
8) Using network tester to test the cable whether is working.
pin color
white/green
green
blue
white/orange
white/blue
white/brown
orange
brown
1
2
3
4
5
6
7
8
pin color
1
2
3
4
5
6
7
8
white/green
green
blue
white/orange
white/blue
white/brown
orange
brown
EIA/TIA 568A
EIA/TIA 568B
Notice
When choose RJ-45 make sure if one end is EIA/TIA568B,the other end should also be EIA/TIA568B.
When choose RJ-45 make sure if one end is EIA/TIA568A,the other end should also be EIA/TIA568A.
