Board
Diagram
Please follow the following installation steps
Please check the following items before installation, if any missing, please contact your dealer.
Fast Ethernet Converter 1pc
Power Adapter 1pc
Hangers 2pcs
User Manul 1pc
1) Please turn off the signal source and the device's power, installation with power on may damage the
device;
2) Please check if the network cable and other transmission line are occupied by other device;
3) Use a network cable to connect with fast ethernet converter's LAN port and NVR or computer;
4) Use two single mode double optical fibers to connect with two fast Ethernet convert's optical port, attention
the fiber connect with RX and TX need to be cross connection. That means to use one fiber to connect with
optical transceiver's TX, and the other side to connect with the RX;
5) Check if the installation is correct and device is good, make sure all the connection is reliable and power
for the system;
6) Make sure the network is normal.
Installation
Step
This is the fast Ethernet optical transceiver which can convert two different transmission medium between
network cable and optical fiber. It supports 10/100Mbps bandwidth. This product can use in pair or work
with other device, it's widely used in surveillance monitor, FTTH and other situation.
Feature
Provide 100Mbps optical port and Ethernet port, network data can
Adopts X9 optical transceiver, SC connector, use single mode double fibers, transmission distance up to
20km;
Compatible with IEEE 802.3 10BASE-T, IEEE 802.3u 100BASE-TX/FX Ethernet standard;
Support 10/100Mbps full/half duplex auto adaptive, support auto MDI/MDIX;
Power adapter use aviation connector, more stable and resalable;
Dynamic LED indicator, real-time show the working status, provide simple working status indication and
trouble shooting;
Delicate aluminum structure design, convenient for desktop and wall installation.
switch between Ethernet and optical;
Fast
Ethernet Converter
Note
1
2
Please attention two optical fibers need to cross-linking two fast Ethernet converters's optical ports;
Fast Ethernet Converter
1
; FED, SD, LINK is optical fiber port indicator, they mean:
Link: indicate optical port connection status, On: connection ok; Off: connection failed; flash: connection OK and data
switching.
SD: optical port signal detection, On: Optical fiber connection right; Off: Without optical fiber connection.
FED: remote failure mode receive, On: 80ms Off: 20ms Always off: no receive.
2) LED failure indication function, please refer to the below table:
) Power is power indicator
Description
Application
Right
Left
Power Input
Ethernet LED
Optical Port
Link
Optical Port
SD
Optical Port
FED
Status
On
On
On
Off
Connection good
Flash
Flash
On
Off
Connection Good and has data switch
Off
Off
On
Off
Remote Ethernet port can't connect
Off
Off
Off
Off
Fiber RX off line, fiber TX/RX off line
Off
Off
On
Flash
Fiber TX off line
Fiber
SD
FED
Link
Power
SD
FED
Link
Ethernet Port
Optical Port Power and Optical
Indicator
Op
tica
l F
ibe
r
IP
Cam
era
Fast E
thern
et C
onve
rter
Eth
ern
et S
witc
h
Op
tica
l
Fib
er
Fast E
thern
et C
onve
rter
POWER
5VDC
