NIXXO NXG9230, User Manual

Page: 70 / 72

70
The Ok softkey validate your choice and continue with the activation
procedure and the Back softkey is used to return to the previous step
of activation.
3. Request the activation
The phone sends to the network the activation request. Depending on
the network answer, you will have to enter your network secret code
with the alphanumeric keypad followed by a press on the
Ok softkey.
At the end, the new status of the call barring is displayed for three
seconds.
2. Deactivate: The deactivation of call barring follows the same procedure as
the Activation. Moreover, you can deactivate in once all the barrings
programmed.
3. Status: This option allows you to interrogate your provider for the activated
barring.
While receiving the information the message
Please wait is displayed on the
screen, an hourglass is moving and a progress bar is filling.
After a few seconds, you can check the information using the UP / DOWN keys.
The
Back softkey is displayed to go back to the Call barring menu.
4. Change password:
As the
Call barring is protected by a network code, it can be changed using
this feature.
The phone first interrogates the network for the ability to use the call barring. At
that time, the screen displays the message
Please wait .
Then you will have to enter your current network password, then the new one
and finally to confirm this new password. The codes are entered through the
alphanumeric. The
Clr key deletes the current digit and the Ok softkey validate
the entry.
If the transaction is successful, a status screen notifies the change of password.
* Call waiting:
1. Activate: This item is activated (if subscribed to) the Call wait service.
2. Deactivate: This item is deactivated (if subscribed to) the Call wait service.
3. Status: This item interrogates the network about the Call wait service current
status.