Instruction manual
OCM Pro CF
®
OCM Pro CF - Rev. 09 as of 07.06.2016
page 7
1
General
Important
READ CAREFULLY BEFORE USE
KEEP IN A SAFE PLACE FOR LATER REFERENCE
This Instruction manual for the flow measurement unit OCM Pro CF is intended
for the initial start-up of the unit depicted on the title page. This manual is orient-
ed exclusively to qualified expert personnel.
Read this instruction manual carefully and completely prior to installation and
connection since it contains relevant information on this product. Observe the
notes and particularly follow the warning notes and safety instructions.
Keep this manual in a safe place and make sure it is available for the users of
this product at any time.
If you should have problems to understand information contained within this in-
struction manual either contact the manufacturer or one of the distributors for
further support. The manufacturer cannot be held responsible for damage to
persons or material due to incorrectly understood information in this instruction.
In case of selling the instrument this instruction manual shall be provided to the
purchaser since it is a part of the standard delivery.
Detailed information on how to operate the complete system can be found in the
accompanying instruction manual oft NIVUS, Sensors etc.
Personnel requirements
Installation, commissioning and maintenance shall be executed only by person-
nel meeting the demands as follows:
-
Expert personnel with relevant training an appropriate qualification
-
Personnel authorised by the plant operator
Qualified personnel
within the context of this documentation or the safety notes on the product
itself are persons who are sufficiently familiar with installation, mounting, start-
ing up and operation of the product and who have the relevant qualifications
for their work; for example.
-
Training, instruction or authorisation to activate/deactivate, isolate, ground,
and mark electric circuits and devices/systems according to the safety en-
gineering standards.
-
Education and instruction according to the standards of safety engineering
regarding the maintenance and use of adequate safety equipment.
-
First aid training
