Instruction Manual
OCM F
page 70
OCM F - rev. 05 / 06.04.2018
24
Signal Input/Output Menu (I/O)
This menu includes several submenus which both serve to assess and to check sensors as
well as to control signal inputs and outputs. It allows indicating various values (current values
of inputs and outputs, relay conditions, distribution of frequency groups etc.), however does
not enable to influence signals or conditions (offset, adjustment, simulation or similar). The
menu therefore primarily serves in order to assess the parameter settings and for error
diagnosis as well as to transmit data to USB stick.
Fig. 24-1
I/O menu
24.1 I/O submenu “Digital Inputs”
This menu enables to view the digital status of the transmitter’s input terminal. It is distin-
guished between logical “OFF” and “ON”.
Fig. 24-2
Indication of digital input status
24.2 I/O submenu “Analog Outputs”
This menu shows the values to be issued on the D/A-converter calculated by the transmitter
as mA-signal.
Fig. 24-3
Indication of values on analog outputs
Observe the signal display
The currents actually present on the output terminals are not shown here. Only the signal
received by the D/A-converter for output is indicated here.
This menu cannot be used to detect and to view external incorrect connections.
Summary of Contents for OCM F
