Nivus NivuFlow 750, Instruction Manual

Page: 99 / 162

Parameter Setting
NFM 750 - rev. 03 / 27.05.2020 page 99
4 Total Day 4: Total covering 24 hours
5 Power failure
6 Power available again
Fig. 37-5 Totalising scheme
•
Per default the totalising period is between 00:00 o’clock and 24:00 o’clock.
This means that day totals are always created between 00:00 o’clock and 24:00 o’clock.
•
The default totalising time is at 00:00 o’clock.
The totalising time can be modified using >Update (Time)< (Fig. 37-6). Once modified, the to-
talising will start at the time set and stops 24 hours later.
Fig. 37-6 Updating the totalising time
The value shown in >Current< is the subtotal since the last totalising.
37.3 Data Memory
Fig. 37-7 Data Memory Menu
The NivuFlow has an internal data memory (max. 182.398 measurement cycles, more cycles
will start overwriting). It is possible to transfer either portions of your data or all saved read-
ings to an USB stick.