Nivus NivuFlow 750, Instruction Manual

Page: 21 / 162

Delivery, Storage and Transport
NFM 750 - rev. 03 / 27.05.2020 page 21
13 Storage
The permissible maximum values regarding ambient conditions such as temperature and
humidity according to chapter “18 Specifications” shall be necessarily observed.
Protect the NivuFlow Mobile from corrosive or organic solvent vapours, radioactive radiation
as well as strong electromagnetic radiation.

To store the instrument:
1. Remove the batteries.
2. If the hoop guards should be mounted to attach the Connector Box remove the
guards (lack of space) and attach the rubber buffers instead.
Rubber buffers
Necessarily attach the rubber buffers

to prevent the hidden fastening plates on the reverse side of the NFM in the screw
channel from getting lost. The fastening plates are essential since they provide the
threads to fasten the hoop guards and additionally stabilise the guards on the NFM.

because the buffers are designed as impact protection for NFM connections and
protect the sockets etc. from being damaged.
14 Transport
Take precautionary measures and use lashing straps or similar to protect the NivuFlow from
heavy shocks or vibrations.
15 Return
In case of a required reshipment return the unit at customer cost to NIVUS GmbH in Ep-
pingen using the original packaging.
Insufficiently franked shipments will not be accepted!

Prior to shipping (via airfreight):
1. Attach PU stickers (two pieces; 31x17x3.5 mm) right and left on the enclosure
frame (Fig. 15-1 no. 1). This prevents the enclosure from getting closed and
eliminates vacuum formation due to extreme temperature changes.
2. Place the NivuFlow Mobile safely in the original packaging for transport.
Fig. 15-1 Attachment position for PU stickers