Instruction Manual
NivuFlow 650
page 24
NF 650 - rev. 01 / 29.06.2020
15.2 Connectable sensors
You can find the connectable NIVUS sensors and their data or information on
their mounting in the documents “Technical Instructions Transit Time Sensors”
and “Installation Instructions Transit Time Sensors”.
These documents are delivered with the ordered sensors. Alternatively, they
are available for download at www.nivus.com.
15.3 Device identification
The instructions contained within this manual are valid only for the type of device specified on
the title page.
The name plate is fixed on the side of the enclosure and contains the following:
• Name and address of NIVUS GmbH
• CE label
• Information on type and series incl. article and serial number
• Year of manufacture: the first four digits of the serial number represent the year and
the week number of manufacture (1950.....)
• Power supply
In case of enquiries and ordering replacement parts it is important to specify article number
as well as the serial number of the respective transmitter or sensor. This ensures correct and
quick processing.
Note
Check the delivered instrument for accordance with your order by identifying the nameplate.
Check the nameplate for correct specification of the power supply.
F
c
The declaration of conformity is located at the end of the manual.
Nameplates
Fig. 15-4
Nameplate AC version
Fig. 15-5
Nameplate DC version
