Technical Instruction
Ex-Separator Module iXT0
Installation and connection
page 22
Ex-Separator Module iXT0 - rev. 02 / 28.08.2017
Installation and connection
12 Installation instructions
−
Observe appropriate installation.
−
Follow applicable legal or operational guidelines.
Inappropriate use may result in injuries and/or damage on instruments.
12.1 Hints to avoid electrostatic discharge (ESD)
ATTENTION
ESD Risks
Maintenance procedures which do not require power supply of the
instrument shall not be executed before the unit has been discon-
nected from mains power in order to minimise danger and ESD
risks.
Disconnect the iXT0 from mains power!
The sensitive electronic components inside the unit may get damaged by static
electricity. The manufacturer recommends the following steps to prevent the de-
vice from getting damaged due to electrostatic discharge.
−
Discharge static electricity from your body before touching the instrument’s
electronic components.
−
Avoid unnecessary movements to reduce the risk of building up static elec-
tricity.
12.2 Installation place
The iXT0 with DIN rail fastening is conceived for installation in switching cabinets.
−
Observe adequate ventilation at the installation place e. g. by using a fan or a
heat exchanger.
