15
... 4. Programming functions
First, test your water with the test
strips provided:
➔
Dip the strip into the water and then
shake it lightly off.
➔
After about a minute you can read
the result by counting the red dots on
the test strip.
➔
The settings corresponding to the
different levels of hardness are as fol-
lows:
Test strip / hardness level
= Display
1 red dot / 1–7°
= “HARDNESS LEVEL 1”
2 red dots / 8–14°
= “HARDNESS LEVEL 2”
3 red dots / 15–21°
= “HARDNESS LEVEL 3”
4 red dots / > 21°
= “HARDNESS LEVEL 4”
Note:
If none of the dots turn red on
the test strip, please set level 1.
➔
Press the program key
P
to enter
programming mode.
➔
Press the
>
key until “PROGRAM W.
HARDNESS” appears (it will not ap -
pear if the filter setting is on “FILTER
YES” – see chapter 4.2).
➔
Press the
ok
key.
➔
Press the
>
key until the ap pro pri -
ate level appears in the display.
➔
Press the
ok
key to confirm. The
display reads: “PROGRAM W. HARD-
NESS”.
➔
You can now either continue in
programming mode to change other
function settings or press
exit
to leave
programming mode.
4.4 Temperature
You can change the coffee temper -
ature to “NORMAL”, “HIGH” or
“MAXIMUM” as desired. The default
setting is “HIGH”:
➔
Press the program key
P
to enter
programming mode.
➔
Press the
>
key until “PROGRAM
TEMPERATURE” appears.
➔
Press the
ok
key.
➔
Press the
>
key until the desired
setting appears.
➔
Press the
ok
key to confirm.
The display reads: “PROGRAM
TEMPERATURE”.
➔
You can now either continue in
programming mode to change other
function settings or press
exit
to leave
programming mode.
4.5 Automatic switch off
This function allows you to program
the machine to switch off auto matic -
ally a given number of hours after the
last brew ing operation. The default
sett ing is 0,5 hours.
➔
Press the program key
P
to enter
programming mode.
➔
Press the
>
key until “PROGRAM
TIMES” appears
➔
Press the
ok
key. The display reads
“UNIT OFF AFTER”.
➔
Press the
ok
key to confirm.
➔
Press the
>
key until the desired
number of hours (0,5 – 12 hours are
possible) appears.
➔
Press the
ok
key to confirm.
➔
You can return to programming
mode “PROGRAM TIMES” by press -
ing the
exit
key.
➔
You can now either continue in
programm ing mode to change other
function settings or press
exit
to
leave programming mode.
Downloaded from CoffeeMachineManual.com Manuals
