DVS-110 QUICK REFERENCE GUIDE
REMOVE THE EYECUP:
1. Hold the base of the eyecup tightly, aligning center line of the thumb where
the eyecup joins the eyepiece.
2.
Lift eyecup away from the eyepiece while keeping a firm grip on the
eyecup.
ATTACH THE HEAD/HELMET MOUNT ADAPTER TO THE MONOCULAR:
1. Hold the monocular in the left hand with the purge screw facing up and the
objective lens away from your body. (The purge screw is located within the
mini-rail closet to the ON/OFF/IR switch.)
2. Take the head/helmet mount adapter in the right hand, holding the Center
Pin Knob between the forefinger and thumb. The Alignment Boss should
be facing towards the objective lens of the monocular and can be held in
the palm of the same hand.
3. Rotate the Centering Pin Knob to raise the centering pin.
4. Slide the head/helmet mount receiving dovetail over the mini-rail of the
monocular so that the Centering Pin Knob is centered over the rail.
5. Release the Centering Pin Knob and ensure that the mount is fully locked
onto the monocular rail.
ATTACH THE MONOCULAR TO THE DIVE MASK:
1. Hold the dive mask in the right hand with the nose of the mask facing down
and the Alignment Socket towards your body.
2. Hold the monocular (with the head/helmet mount adapter attached) in the
left hand with the release lever facing up and the monocular eyepiece
facing the dive mask.
3.
Press the Alignment Boss into the Alignment Socket until the release lever
catches and ensure the monocular is securely fastened to the dive mask.
INTERPUPILLARY, ELEVATION, FORE/AFT ADJUSTMENTS:
1.
With the dive mask on, unscrew the Adjustment Knob until a stop occurs.
2. Firmly hold the monocular and push away from the dive mask. This
will disengage the positioning detents.
CAUTION: ROTATING THE
MONOCULAR WITHOUT FULLY DISENGAGING THE POSITIONING
DETENTS WILL DAMAGE THE MOUNT ADAPTER.
3. Rotate the monocular up or down so that the eyepiece is directly in front of
the eye you intend to use in conjunction with the monocular.
4.
Fore and Aft adjustments are made by pressing the fore/aft adjustment
button and moving the monocular away from and towards the mask.
5.
Hand tighten the Adjustment Knob when a suitable position has be located.
