Micronics
U1000-HM User Manual
Issue 2.2
Page 18
6.1 How To Enter The Pipe ID
Figure 11 shows the Enter Pipe ID screen after an initial power up.
Initially, the hundreds unit (
0
50.0) will blink.
Press the
key to increment the hundreds digit (
0
50.0) in the sequence 0, 1.
Press once to increment digit, or hold key down to automatically
toggle between 0 and 1.
Press the
key to decrement the hundreds digit in the sequence 1, 0. Press
once to decrement digit, or hold key down to automatically toggle
between 1 and 0.
Press the
key to move to the tens digit (0
5
0.0). The tens digit should now blink.
Increment the tens digit in the sequence 0,1,2,3,4,5,6,7,8,9,0 using
the
key.
Press once to increment digit or hold down to scroll
through the numeric sequence. Decrement the tens digit in the
sequence 9,8,7,6,5,4,3,2,1,0,9 using the
key. Press once to
increment digit or hold down to scroll through the numeric sequence.
Press the
key to move to the units digit (05
0
.0). The units digit should now
blink. Increment or decrement the units digit in an identical manner
to the tens digit described above.
Press the
key to move to the decimal digit (050.
0
). The decimal digit should
now blink. Increment or decrement the decimal digit in an identical
manner to the tens digit described above.
Press
the
Use
key to enter the Pipe ID numerical value, and move to the next
screen
and
keys to scroll through the pipe materials and
then press
To select the material and complete the
setup procedure.
V
Figure 11 Enter Pipe ID Screen (Metric)
>
>
>
Λ
V
Enter Pipe ID:
050.00 mm
Pipe material
Steel
V
Λ
