Chapter 3: Featuring Configuration – Web UI
Featuring Configuration – Web UI
NGSME16T2H User Manual | 67
Security /Network
Port Security Limit Control Configuration
This page allows you to configure the Port Security Limit Control system and port
settings.
Limit Control allows for limiting the number of users on a given port. A user is
identified by a MAC address and VLAN ID. If Limit Control is enabled on a port, the
limit specifies the maximum number of users on the port. If this number is exceeded,
an action is taken. The action can be one of the four different actions as described
below.
The Limit Control module utilizes a lower-layer module, Port Security module, which
manages MAC addresses learnt on the port.
The Limit Control configuration consists of two sections, a system- and a port-wide.
