eka7021a0600h_06
3 / 5
2.5.2 A
CCESSORIES
Single-blade curved paddle
(168 mm, 6.6 inches)
EAL–701–1
2-blade flexible paddle
(172 mm, 6.8 inches)
EAL–703–1
Single-blade 90° paddle
(130 mm, 5.1 inches)
EAL–707–1
Inserted through a 1",
45 mm (1.75 inches)
long process
connection.
Default blade, for most
applications
Can be inserted even through a
1", 90 mm (3.5 inches) long
process connection.
Paddle cannot be used with
sticky materials, as they may
prevent the blades from closing
when removing.
The blades must be closed by
pressing the blade tips together
when the unit is installed.
Inserted through a 1½", 50 mm
(2 inches) long process
connection.
For light materials due to its large
blade.
Single-blade curved paddle
(120 mm, 4.7 inches)
EAL–701–1
2-blade flexible paddle (120 mm, 4.7 inches)
EAL–704–1
Rigid pipe for cable extended version
EAK–7
–1
Inserted through a 1",
45 mm (1.75 inches)
long process
connection.
For coarse or sticky
materials. The material
stuck to the blade tends
to affect the operation
of the unit less.
More robust due to the
blade’s small area and
insertion length.
Can be inserted even through a
1", 90 mm (3.5 inches) long
process connection.
Paddle cannot be used with
sticky materials, as they may
prevent the blades from closing
when removing.
The blades must be closed by
pressing the blade tips together
when the unit is installed.
For materials with a larger
specific weight.
By pulling it over the cable rope,
it makes units with cable rope
extension stiffer.
Caution! If the cable rope is
shortened, the tube must be cut
to a matching length.
The length of the exposed cable
rope section must be at least 30
mm (1.2 inches).
Single-blade straight paddle
(170 mm, 6.7 inches)
EAL–705–1
3- blade extended paddle (268 mm, 10.5 inches)
EAL–708–1
Pipe extension Ø10x1
EAR–70
–1
Inserted through a 1½"
process connection.
For coarse or sticky
materials. The material
stuck to the blade tends
to affect the operation
of the unit less.
Use a mounting plate to insert
paddle into the tank!
Primarily for light materials due
to its large blade.
Extended variant.
The extension can only be used
with a top-mounted standard
model.
It is crucial it the paddle of pipe-
extended models is not exposed
to strong lateral forces, for they
may damage the pipe!
If the required “L” length is
different than the one in the order
code, it must be specified.
Single-blade straight paddle
(70 mm, 2.75 inches)
EAL–706–1
3-blade standard paddle (120 mm, 4.7 inches)
EAL–709–1
Mounting plate
EAM–70
–0
Inserted through a 1½"
process connection.
For dense materials.
More robust due to the
blade’s small area and
insertion length.
Use a mounting plate to insert
paddle into the tank!
Primarily for light materials due
to its large blade.
Stainless steel and carbon
steel variant available. The
latter is electrostatic powder-
coated to prevent rusting.
Sliding sleeve for rod extended version
EAM-703-0
Flexible Coupling
EAS-701-0
Only for the E
R-7
variant,
for changing the insertion length
To protect the paddle from
strong dynamical effects that
may occur during operation.