6
5) Adjusting the speed of head rotation
- available Head spin speeds: 0-60-120-300-600 rpm. Each press switches rotation speed.
6) Scan function button
- available angles of beam display: 0-10°-45°-90°-180°. Each press will switch the beam display
angle.
7) Manual / Automatic mode button
- Changes the instrument leveling from automatic to manual mode
8) clockwise head rotation switch button
- When the head does not rotate, press the button to scan in desired direction
9) Counter-clockwise head rotation switch button
- When the head does not rotate, press the button to scan in desired direction
10) The adjustment of slope towards the X axis
- When leveling of instrument is switched to manual mode, use keys to enter a inclination in the
X axis direction
11) The adjustment of slope towards the Y axis
- When leveling of instrument is switched to manual mode, use keys to enter a inclination in the
Y axis direction
12) ASD System (when ADS system is switched on - the LED flashes slowly)
- Too large inclination of the instrument or unwanted movement / strike of the instrument will
cause the LED will blink quickly - warning the user about disleveling of instrument
WORKING WITH LASER LEVEL
Turning on the power
On the front panel press . The instrument will level by itself and the power LED lights up.
Press the button again to turn off the power.
Once leveled up, the laser LED stops blinking and the laser head rotates at a speed of 600 rpm.
If instrument will be is set inclined more than ± 5 °, manual mode LED will start to blink.
Warning:
If the unit will not level-up in time longer than 5 minutes, turn off and turn on the laser
level again.
Rotating laser head mode
button allows you to adjust the speed of laser head rotation. Switching the speed is carried
out by pressing again this button. It is possible to rotate the head in the clockwise and counter-
clockwise.
Scan mode
Adjust the rotating speed of the head. Press which will cause the device goes into scan
mode, the laser will begin to "draw" a line at set distance. Each time when you press this button
you will cause increase the range of "drawn" line. Depending on your needs, switch the direction
of rotation of the head (clockwise or counter-clockwise).
