Nivel System DM-120, User Manual

Page: 7 / 16

Long press button under measuring mode and
enter into continuous measuring mode. Maximum
and Minimum value show on the LCD.
Length Measurement & Calculation
Single Distance Measurement:
Turn on the laser beam by short press of the button
under measring mode; Press the button
again for single measurement of length,then the
measured results displayed in the major display
area.
Continuous Measurement:
Present result displays in major display area. Short
press botton to exit continuous measuring
mode.
Press button , shows on the screen. One
of the side of rectangle blinking on the display,
please follow the below instructions for area
measuring:
Area Measurement:
Press once for length
Press again for width
The device calculates and shows the result in the
major display area.
Press , clear off the result and measuring again
if necessary