Using the laser
To turn on the laser set the switch in ON position
.
The device will start to display the beam in horizontal.
If you want to work with laser sensor, laser must be switched into modulation mode
, diode near the icon
will light up in green.
In CL1 using button you can turn on and off vertical and horizontal beam. Every
press of this button let you display vertical, horizontal or all beams at the same time.
Lase will level up by itself, in case of settin the laser out of levelling range the laser
beams won’t be displayed – you will hear the sound signal
Turning off the laser
To turn off the laser, set the switch in OFF position.
Magnetic bracket
Mount the laser to the bracket which can be used as a practical shelf. Using the
magnet you can place the shelf on metal element, adjusting laser beam for working
conditions.
FREE EXTENDED WARRANTY- 24 months
To use the free warranty extension to 24 months, the instrument must be registered
within three months from the date of purchase. Registration is done via a form on the
web: http://www.tpi.com.pl/rejestracja-gwarancji
