5
4. MOUNTING AND REMOVING THE FILE
WARNING
●
Be sure to turn off the air supply and disconnect
the air hose.
4-1. Mounting / Removing the file
(Fig. 2)
●
Mounting
Insert the file shank into the Holder and tighten the
Hex. Socket Set Screw with the Hex. Socket Screw
Key until the file is securely fixed.
●
Removing
Loosen the Hex. Socket Set Screw with the Hex.
Wrench Key and take it out.
Hex. Socket Screw Key
Fig. 2
5. HOW TO OPERATE THE TOOL
WARNING
●
Always wear eye protection during operations.
Start the operation and press the tool slightly to
the workpiece.
●
Even if the tool is strongly pressed, the filing
efficiency cannot be improved.
5-1. Start and Stop
(Fig. 3)
To start: Turn the Valve Ring clockwise and align
"
▲
" with "ON" on the Housing.
To stop: Turn the Valve Ring counterclockwise and
align "
▲
" with "OFF" on the Housing.
align “▲” with “OFF” on the Housing.
Fig. 3
Fig. 3
5-2. How to use the Sanding Pad (Optional Parts)
(Fig. 4)
(1)
Attach the Abrasive Paper on the sponge of
Sanding Pad and fix it with the Paper Clamp as
shown on the Fig. 4.
(2)
Mount the Sanding Pad in the Same manner as
the one for the file and carry out operation.
(3)
Cut the locally available Abrasive Paper 20mm x
190mm size and use it.
Caution: The Sanding Pad may cause the larger
vibration of the tool than the one caused
by the file.
by the file.
Fig. 4
Shank
Shank
Fig. 4
6. THREAD SIZE OF HOSE FITTING
The product comes with a metal fitting with
Rc(metric) thread. Connect the Bushing R thread x
NPT thread included as standard accessories, if you
would like to have American NPT thread instead.
7. STORAGE
CAUTION
●
When tool is not used, store it out of reach of
children.
Avoid storing the tool in a location subject to high
humidity. If the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation, oil the tool at the air inlet
with machine oil ISO VG-10 and run it for a short
time.
8. ORDERING SERVICE PARTS
For further operational and handling information or
for replacement of parts and components, contact
the company from whom you purchased the tool or
an authorized dealer.
In ordering parts and components give each part
number, part name and quantity required.
Use only NITTO genuine parts.
ASH-900_E.indd 5
13.6.3 3:51:50 PM
