8
EN
5 Preparation
WARNING
During work, be sure to wear eye protection, earplugs, a dust mask, and gloves (other than knitted gloves).
When replacing or adjusting the Grinding Wheel or parts, be sure to detach the Connecting Hose from the tool.
Never touch moving parts while the tool is running.
After stopping work, the tip of the grinding tool will continue to rotate for a while.
Never touch moving parts until the tool completely stops.
Replacing the Grinding Wheel
WARNING
Before replacing the Grinding Wheel, always turn OFF the Valve Ring and detach the Connecting Hose from the
tool.
Attaching
1
Insert the Outer Flange (
5
) into the Grinding
Wheel (
4
)
2
While holding the Spindle Lock Button (
1
),
turn the Driving Flange (
3
) by hand, and push
the button at the position where rotation stops
3
Align the notch of the Outer Flange (
5
)
with the Key and mount it together with the
Grinding Wheel (
4
)
4
Using a 6 mm Hex Socket Screw Key (
7
),
tighten the Outer Flange Bolt (
6
) to the
Spindle (
2
)
When you release your hand from the Spindle Lock
Button (
1
), the lock is released automatically.
1
2
3
4
5
6
7
Removing
1
While holding the Spindle Lock Button (
1
),
turn the Grinding Wheel (
4
) by hand, and
push the Button at the position where rotation
stops
2
Using a 6 mm Hex Socket Screw Key (
7
),
loosen the Outer Flange Bolt (
6
)
This makes it possible to remove the Grinding Wheel.
3
Remove the Grinding Wheel
