10
EN
Basic Operation
Changeover switch
CAUTION
Do not operate the changeover switch while the tool is rotating. Doing so could cause a failure.
When the tool is not used, set the switch to neutral position.
Do not apply a shock (such as dropping) or excessive load to the changeover switch. Doing so could cause a
failure.
By sliding the changeover switch, you can change the rotation direction of the electric screwdriver.
“ - ” means neutral. The electric screwdriver does not rotate.
Rotates
counterclockwise
Rotates clockwise
Start and stop
WARNING
Never touch the bit while it is rotating.
Do not direct the bit toward people or animals.
CAUTION
Make sure to properly press the start switch.
Slide the changeover switch to the direction in which you want the tool to rotate and press the start switch to start.
Releasing the start switch stops rotation.
When you press the lever switch, the bit rotates.
Releasing the lever switch stops rotation.
7
3
1
9
5
TV06941-2̲DLV5800̲en.indb 10
TV06941-2̲DLV5800̲en.indb 10
2019/08/19 11:04:22
2019/08/19 11:04:22
