7
5-6. How to use
CAUTION
●
This tool is a push start type.
If the throttle lever is turned on with the countersink
pressed against the workpiece or the countersink is
suddenly pressed against the workpiece, it will lead
to be broken.
With the workpiece
fi
xed and the throttle lever turned
on, insert the countersink into the hole in the worpiece,
and slowly press it against the workpiece. (Fig.8)
Fig.8
5-7. Hanging the hook
Use a hook for hanging the tool.(Fig.9)
Hook
Fig.9
6 STORAGE
WARNING
●
When tool is not used, store it out of reach of
children.
Avoid storing the tool in a location subject to high
humidity. If the tool is left as it is used, residual
moisture on the inside can cause rusting. Before
storing, and after operation, oil the tool at the air inlet
with machine oil ISO VG-10 and run it for a short time.
7 ORDERING SERVICE PARTS
●
For further operational and handling information or
for replacement of parts and components, contact
the company from whom you purchased the tool or
an authorized dealer.
●
In ordering parts and components give each part
number, part name and quantity required.
●
Use only NITTO genuine parts.
8 THREAD SIZE OF HOSE FITTING
The product comes has air supply inlet of Rc(metric)
thread. Connect the Bushing R thread×NPT thread
included as standard accessories, if you would like to
have American NPT thread instead.
