Nitta PP1535-1, Operation Manual

Page: 4 / 20

- 3 -
1 Safety Precautions- Continued-
Confirm that the power source used is within the designated
specifications of the Heat Press.
Use beyond the designated specifications may cause fire or electric
shock.
Specification Power Source
For 100V 100V
－
120V 50/60Hz
For 200V 200V － 240V 50/60Hz
Use a conversion plug when the plug shape does not match the
socket.
Failure to do this may cause electric shock.
The plug shape of the attached power cable is as follows.
The conversion plug is not attached.
When a conversion plug is necessary, users must provide their own.
Connect the main plug correctly to the socket outlet.
The power cable of the press uses an earth connection plug.
Connect the main plug correctly into an earth connection outlet to
prevent electric shock
.
Always use anti-heat gloves when handling the Heat Press to
prevent burns.
A label “Hot!” is on the top and bottom plates of the press to warn
against high temperature.
Do not touch any part of the press, other than its handle, even
with anti-heat gloves on while the press is being heated or while it
is still hot after using.
Metal edge portions beyond the handle can exceed 110
℃
, which may
cause burns even with anti-heat gloves on.
Disconnect the main plug from the socket outlet immediately after
use.
An operator should pay attention so that others do not touch the
press carelessly and get burned before the press has cooled
down.
It takes about two hours for a heated press (110°C) to cool down to
40°C in the room temperature of 25°C once it has been unplugged.
Specification Plug type Plug illustration
For 100V A Type
For 200V CEE7 (S Type)
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING