- 8 -
7-3) How to Make a Finger Joint
(1)
Loosen bolt on clamping bar and insert
belt end in one side of finger puncher.
(2)
Place belt to align marks on belt with
inside or outside edge of clamps. Be sure
to use this same set position for all
punchs.
(3)
Fasten the bolts on both clamps with a
wrench to secure the belt position.
(4)
Belt insert direction
a) Continuous punching
After punching one end of belt, pull belt
through clamping bar until reaching next
punching position.
Belt
Set both belt ends to same side of the
clamp
NO
Clamp bar bolt
Marks
Clamp bars
Cutting Sheet
