Nits BUH-600 User Manual Download Page 9

 

17

- Use only a clean soft cloth to clean your Headset. 

- When the Headset is not in use, always keep it in its case. 

- Dot not allow children to play with your Headset, as they may injure themselves and damage the Headset as well. 

- Do not place the Headset in an extremely hot or cold temperature, when the Headset will not be used for a while. 

 

Children   

Do not allow children play with your Headset, as the small parts may cause a choking hazard. 

 

Travel Charger    

- The charger is designed for indoor use only. Do not use it for outdoors. 

- The charger must be connected to the designated power sources as marked. 

- When removing the charger from an outlet, never pull the charger cord, as it may damage the charger.

 

 

 

 

18

Battery Information 

 

New batteries   

For first time use, plug the adapter into the Headset and charge it at least 6 hours until the red 

indicator turns off.

 

‧ 

Battery care 

-Only qualified Service Centers are authorized to remove or replace the battery. 

-The rechargeable battery has a long service life if treated with care. 

-The battery can only be charged in a temperature range of –10 C to 45 °C. 

-Use the battery in room temperature for maximum battery capacity. 

-The battery capacity may be reduced if operating in a cold environment. 

        -The Headset has to be recharged every two months, when it is not in use during a long time. 

 

 

Summary of Contents for BUH-600














Reviews: