background image

2015+ Dodge Challenger Switch Panel Installation

PART NUMBER: 00-11045

I N S T A L L A T I O N   I N S T R U C T I O N S

W W W . N I T R O U S O U T L E T . C O M / I N S T A L L A T I O N - G U I D E S

N I T R O U S   O U T L E T     |     3 0 5   S O U T H   2 8 T H   S T R E E T     |    W A C O ,  T X   7 6 7 1 0     |       P :  2 5 4 - 8 4 8 - 4 3 0 0     |    W W W. N I T R O U S O U T L E T. C O M

IMPORTANT- ALL APPROPRIATE SAFETY EQUIPMENT (GLOVES, TOOLS ETC.) MUST BE USED DURING THE INSTALLATION OF THIS PRODUCT(S). NITRO DAVE’S LLC ACCEPTS NO 

RESPONSIBILITY FOR INJURIES RESULTING IN THE INSTALLATION OF ANY PRODUCT(S). NITROUS OXIDE IS FOR OFF-ROAD USE ONLY.

©N2O112619

I N S T A L L A T I O N   I N S T R U C T I O N S

This Nitrous Outlet Switch Panel is designed specifically for the 2015+ Dodge Challenger. If you need any assistance during installation or if 
you have questions about this wiring harness, call our Tech Help Line at (254) 848-4300.

Tools Needed for Installation*:

• Phillips Head Screwdriver  •  Flat Head Screwdriver  

•  Plastic Trim Tool   

• 10mm and 13mm Socket   

•  Short Extension  

• Ratchet  

 

• 7mm Socket 

*These are the tools required for installation of this kit on a stock vehicle. If your vehicle has aftermarket parts, other tools may be required. 

Step 1:

Make sure the car is in neutral and the emergency brake is 
engaged and/or blocks in front and behind the tires to keep 
the car from moving.

Step 2:

Using a plastic pry tool, carefully pry the leather boot up while 
pulling with your hand on the inside.  There are 6 clips hold-
ing it in place and lift up easily.

Reviews: