NL35 INSTALLATION/OPERATION MANUAL
DO NOT PLUG LIGHT IN UNTIL INSTRUCTED IN MANUAL
READ ALL DIRECTIONS FIRST THEN REFER TO EXAMPLE IMAGES BEFORE PERFORMING THAT STEP
A.
To install bulb, place the light on a table or similar flat, dry working surface.
Use the supplied multitool lock key to loosen the seal ring. Insert the key into the locking latch
on the bottom of the light as shown in FIG 1. Turn and hold the key to the left to release the
locking mechanism. At the same time rotate the seal ring in a counter clockwise direction to
loosen. Remove ring and lens. (See FIG 2)
®
