Nitek VH851 Installation And Operation Manual Download Page 7

Page 5

Troubleshooting

Video inverted or rolling and unstable.
• Reverse the wires of the twisted pair at either
   the transmitter or receiver.

No video out at the receiver.
• Check to make sure that there is video in at
   the transmit end.
• Make sure that the pair of wires you are using
   is not open or shorted between the transmit
   and receiver points.
• Check power to the receiver.

Ghost image at the receiver.
• Bridge tap or "T" tap on the twisted pair video
   line. Remove tap.

For additional help with problems please call NITEK

®

 Tech-

nical Assistance at (800) 528-4343. Hours are from  8am to
5pm Central Standard Time Monday through Friday. We are
always ready to help.

Problem
Fix/Cause

Problem
Fix/Cause

Limited Warranty

NITEK

®

 warranties that this unit  will be free from defects in

materials and/or workmanship. Defective units will be re-
paired or replaced at our option within 2 years from the date of
shipment. This warranty does not apply to units abused
through misuse or subjected to improper and/or excessive
voltage, beyond our control.

For complete warranty details contact NITEK

®

Problem
Fix/Cause

Summary of Contents for VH851









Reviews: