Copyright © 2022 - www.niteforce.mobi
PIR Interval:
It means how often the PIR sensor can be allowed to work. This prevents the card from filling up with too many redundant images.
Time Lapse:
When choose time lapse, camera takes photos or videos by time, not by triggering. It’s useful for continuously monitoring of an area.
SYSTEM SETTINGS
Work-Time
4 Groups
Send Mode
Instant (0~99), 0 means infinity
Remote Control
Real Time/Delay 0.5H/1H/2H /3H/4H/6H/12H/24H
Time Calibration
Off/On
Rename
Edit camera name
Over Write
Off/On
Location (aGPS)
On/Off
Send Mode
: Enable the instant transmission. 0-99 means the number of photos which is allowed to send out per day.
Remote Control
: You can remote control your camera via mobile phone or web-portal. Please note if you choose Real Time, the power
consumption will be higher as the wireless module will stay awake. Delay 24H means the wireless module will automatically wake up after 24
hours. This means your command will be carried out after 24 hours.
Work Time:
The camera can work at a preset time and preset days. In the rest of the time the camera is not work. Work hour: 00:00-00:00 means
24 hours. If the settings is cross the day, for example: Start: 20:00 Stop: 10:00 means 00:00-10:00 am and 20:00-24:00 of the chosen day.
CAMERA LED LIGHTS
Color
Flash slowly
Steady
Flash fast
Light1
Red
PIR is working
Low power
Light2
Green
Searching for signal
Good signal
Sending pictures
Yellow-
green
Weak signal
Red
No signal
The camera goes to Active Mode when the two lights are off
Blue Light is GPS indication light
MANUAL PHOTO
You can manually take a picture and check if your APP has successfully received the photo.
Press the “
RST
” button when the light 2 is green or yellow-green. Camera will shoot a picture at once
and send to cloud platform. The cloud platform will receive the photo within 30 seconds if the camera
has a good signal.
If light 2 become red after manually shooting, it means the picture did not send. We suggest checking
this:
Micro SD card’s capacity (max up to 32G)
Check your SIM card (data speed, PIN code OFF)
STARTING THE CAMERA
STEP 1
: Turn on the camera (ON button)
-
Use the OFF/ON switch to turn on the camera
“PIR & Power” Light 1
“Network Status” Light 2
