SYSMAX Industry Co., Ltd.
TEL: +86-20-83862000
FAX:
+86-20-83882723
E-mail:
Web: www.nitecore.com
Address
：
Rm1401-03, Glorious Tower, 850 East Dongfeng
Road, Guangzhou, China 510600
Power Tips
1. With the light on, the blue LED built into the switch will flash once
every two seconds when battery power levels reach 50%. The blue LED
will flash quickly when battery power is close to depletion
2. After battery installation or with the mode switch being pressed when
the light is off, the blue LED built into the switch will blink to indicate
remaining battery power. The power indicators will blink three times
when power levels are above 50%; twice when power levels are below
50%; and once when battery power is close to depletion.
Changing Batteries
Batteries should be replaced when any of the following occurs: The
power indicator blinks rapidly, output appears to be dim or the flashlight
becomes unresponsive.
Maintenance
Every 6 months, threads should be wiped with a clean cloth followed by
a thin coating of silicon-based lubricant.
Warranty Service
All NITECORE® products are warranted for quality. DOA / defective
products can be exchanged for replacement through a local
distributor/dealer within the 15 days of purchase. After 15 days, all
defective / malfunctioning NITECORE® products will be repaired free of
charge for a period of 60 months (5 years) from the date of purchase.
Beyond 60 months, a limited warranty applies, covering the cost of labor
and maintenance, but not the cost of accessories or replacement parts.
The warranty is nullified in all of the following situations:
1. The product(s) is/are broken down, reconstructed and/or modified by
unauthorized parties.
2. The product(s) is/are damaged through improper use.
3. The product(s) is/are damaged by leakage of batteries.
For the latest information on NITECORE® products and services, please
contact a local NITECORE® distributor or send an email to
[email protected]
The Nitecore official website shall prevail in case of any product data
changes.
Please follow our facebook for more info: NITECORE Flashlights
Brightness Levels
With the light on, half press the mode switch to cycle through
brightness levels of ultra-low, low, medium, high and turbo. This mode
provides an intelligent memory function to ensure direct access to the
setting last used when reactivated.
Instant ultra-low/turbo
Instant ultra-low: with the light off, press the on/off switch for more than
one second to create ultra-low output of 1 lumen;
Instant turbo: with the light off, press the mode switch for more than
one sencond to create turbo output of 1020 lumens.
NOTE:
The EA41 will lower its output lumens after 20 minutes of use to
prevent overheating and preserve battery longevity.
Special modes (Strobe/Location/SOS)
With the light on, press the mode switch for more than one second to
enter strobe mode. To cycle through all three modes of Strobe / Location /
SOS, simply press the mode switch for more than one second again.
To exit special modes, simply press the on/off switch .
Strobe ready
With the light off, press the mode switch twice in quick succession to
enter strobe mode instantly. To exit, simply press any button and the light
will turn off.
Lockout/Unlock
With the light turned on, press and hold dual switches for more than one
second until the flashlight is switched off and enters into lockout mode. In
this mode, the EA41 can continue working on one set of batteries for over
12 months.
Lockout mode prevents accidental activation of the flashlight. To exit
lockout mode, simply press and hold dual switches for more than one
second again.
NOTE:
When the EA41 is kept in a backpack or left unused for extended periods,
Nitecore recommends removing the batteries to cut off power, thus
preventing battery drain or accidental activation of the flashlight.
Thanks for purchasing NITECORE!
®
The All-Round Flashlight Expert
