Nitec KWIK-GIG, User Manual, Page: 7 / 10

MASTER/SLAVE OPERATION (via UFI wi-fi transceiver)
KWIK-GIG units can operate in Master/Slave mode wirelessly using the optional UFI wi-fi
transceiver. The master UFI-enabled unit can be operated in stand-alone mode or by the
wireless footswitch, with the UFI set to transmit. The slave units should all be set to slave
mode, with the UFI set to receive.
Note: Slave units should be configured before configuring master unit
Note: All units should be set to same DMX address, mode and UFI channel
Setup as below:
SLAVE UNITS:
Press MENU button until 3-CH or 15CH is displayed
Press ENTER
Set DMX address to d 1
Set UFI to preferred receiving channel (1-16)
Attach UFI to the KWIK-GIG's USB port
MASTER UNIT:
Press MENU button until DMX mode is displayed that matches slave configuration
Press ENTER
Set DMX address to d 1
Set to Auto or Sound-Active mode
Set UFI to chosen transmitting channel (1-16)
Attach UFI to the KWIK-GIG's USB port
14
BUTTON
FUNCTION
Menu
Selects operating mode or exits submenus
Up
Scrolls up through option lists or selects higher value
Down
Scrolls down through option lists or selects lower value
Enter
Activates displayed menu option or selected value
MODE OPTIONS / VALUES DESCRIPTION
DMX Mode
3-CH
d 1–d512
Sets DMX starting address
15CH
Preset Colors
C-- C 1–C 7
Selects preset colors (red, green,
blue, cyan, magenta, yellow, or white.)
Auto Program Auto Turns on Auto mode
Speed S-- S 1–S100
Sets the speed of auto programs (fast to slow)
Sound- Active Snd
Sets auto programs to sound-active mode
Sound Sensitivity
SenS u 1–u100 Adjusts internal mic sensitivity in Sound mode
RGB Color Mixing U--
r 0–r100
Adjust red, green, and blue color levels
g 0–g100
b 0–b100
Infrared Mode Ser
ON
On/Off setting for infrared mode for IR6 remote
OFF
Wireless Foot
Controller
rF
OFF
On/Off setting for wireless foot control
Sets channel for wireless foot control
ON rF1–16
CONTROL MENU OVERVIEW
CONTROL PANEL
FUNCTION MENU
7