background image

  www.nitedevil.com 

                                                          XSEE240 

 

NiteDevil Traditional Wide Dynamic HD Cameras  

 

Multi-Format (TVI/AHD/CVI/CVBS) 

 

Email: 

[email protected]

                                                                                                  

Last Revised: 12/04/2018

 

  

 

 

Menu  Description 
 

The following menu description gives more in depth information about the menu options. In some 
instances recommendations are made to hopefully enhance the results. However every installation 
will be different and there will occasions when alternative solutions may be more suitable. 

 

 

 

IRIS

 

ELC  
 
ALC  

Electronic Light Control – measures overall brightness  
 
Auto light compensation – measures peak light levels  

 
ELC    

Electronic Light Control – measures overall brightness of picture and applies to manual iris lens 

ALC    

Auto light compensation – measures peak light levels and applies to auto iris lens which this camera has.

 

Recommendation is to set ELC

 

 
 

 
 

FOCUS ADJ 

 

 
OFF 
ON  

Focus Area   Wide / Narrow / Middle  (Def  Wide) 
Disp Tone  (Tone  0 Low, 1 Medium , 2 High) Def 0 
Disp H_Pos   0 ~ 60  Horizontal Position  (Def  2) 
Disp V_Pos   0 ~ 34  Vertical Position  (Def  12) 
Disp H_Size  0 ~ 60  Horizontal Size  (Def 12) 
Disp V_Size  0 ~ 34  Vertical Size  (Def 14) 
Return 

 
 

This camera has a fixed lens and therefore focus is not adjustable. This option is N/A. 
 
Focus Area Middle / Wide / Narrow  

Select to create a focus box  

In the camera menu you can enter the Focus Adjust option and select and area for best focus result 
by creating a box (Wide, Middle or Narrow) to select the required area for focusing. These 3 bars 
means sharpness, from left to right means from low frequency to high frequency, or from wide 
range to narrow range sharpness. Green stands for the former highest sharpness, Yellow stands for 
the present highest sharpness.  Note that this is a setup aid for manual focusing and only applies 
when manual vari-focal lenses are used . Ensure option is switched off after setup. 
 

Disp Tone  0 / 1 / 2    (

Alter brightness of focus aid) 

 

Disp H _ Pos                

(Set horizontal position of Focus Box) 

 

Disp V _ Pos   

(Set vertical position of Focus Box) 

 

Disp H _ Size  

(Set horizontal size of Focus Box) 

  

Disp V _ Size   

(Set vertical size of Focus Box) 

 
RETURN 

Return to Main Menu 

Summary of Contents for SEE240 Series




















Reviews: