Nissindo IC-A00IA, Operating Instructions Manual

Page: 5 / 16

5
OPERATION
SETTINGS FUNCTION:
OPTION SPECIFICATION
DMX
Slave status: Receives DMX Signal from Control
& master
Auto1
Auto2
Auto3
Auto4
Forward 0
Picture up 8
Picture front
Vertical 8
Picture front
to sleep 8
Random
Running Mode
Sound-active
Master status: Operates automatically and send out
DMX signal to slaves
DMX Address
Channel Mode
1~512
1. Press MENU “ ● ” button to select Setting.
2. Press ENTER “ ● ” button to go to Setting Mode.
3. Press UP “ ▲ ” / DOWN “ ▼ ” button to select DMX.
4. Press ENTER “ ● ” button to go to edit status.
5. Press UP “ ▲ ” / DOWN “ ▼ ” button to modify
numbers from 001~512.
6. Press ENTER “ ● ” button to confirm it.
From 16-Channel to 20-Channel invalid 16
From 17-Channel to 20-Channel control speed 20
Invert Pan
(X Inverse)
Off
On
Load Default
Linear Colour
On
Off
No DMX Signal Keep
Clear
Invert Tilt
(Y Inverse)
Off
On
Swap Pan-Tilt
(XY Inverse)
Off
On
Encoder Pan-Tilt
(XY Decoder)
On
Off
Keep running by original status
Motors reset
Display Power
Save
On
On
Off
Rectify location by optical couple
No rectification
Turing off after 30 seconds
Stays on indefinitely
Exchange function of X & Y (fine adjustment include)
Boot & Lamp on
Lamp turns on when booted.
Off Lamp stays off when booted.
Color wheel linear change
Color wheel no linear change, Half-line change
Press ENTER “
● ” to confirm Dialog, press ENTER “ ● ”
again to restore to default.